STEEL PIPE LASER CUTTING MACHINE
NEW VICTOR has developed this laser cutting machine to reprocess the metal tubes, which can drilling, engraving and cutting in one machine. and this machine with high precision and smooth cuts.
Product Introduction
1.What is a steel pipe laser cutting machine
A steel pipe laser cutting machine is a specialized industrial machine designed for the precise and efficient cutting of steel pipes or tubes using laser technology. This machine is equipped with a high-power laser beam that can be focused on the surface of the steel pipe to cut through it with extreme precision. Steel pipe laser cutting machines are used in various industries, including manufacturing, construction, automotive, and more, for tasks such as cutting pipes to specific lengths, creating complex shapes, or adding perforations and holes to pipes. These machines offer advantages like high-speed cutting, minimal material waste, and the ability to achieve intricate and accurate cuts, making them valuable tools in modern manufacturing processes.
2.Product characteristics
High speed machining and high machining accuracy
Using high rigidity and thickened bed, with bus tube cutting system and bus motor, the processing speed is faster and the accuracy is higher, helping customers reduce costs and increase efficiency
Double chuck straddle cutting, short tail
The cutting head spans from the front of the front chuck to the back, cutting the last workpiece, the tail material is ≥40mm, which can save more material costs
Fast feeding and changing speed
High rigidity design of material rack, stable and fast feeding, cycle time is about 10 seconds Small footprint, can save 20% area
3.Components and characteristics
Pneumatic chuck
1.Full stroke pneumatic chuck, automatic and precise centering, fast automatic processing.
2.Convenient application: the pitch circle of the gear is beating, the backlash of the gear meshing is adjusted in place, and the whole machine is easy to install.
3.Small inertia: high-speed processing can be achieved, which can meet the fast cutting of small pipe fittings.
4.Strong stability: The integral built-in drive structure provides transmission accuracy and stability.
5.The gear has built-in dust-proof to avoid the entry of cutting dust, good dust-proof, high grinding precision and low noise.
6.The rear card can be equipped with jaws or tooling to clamp special-shaped tubes.
Fiber Laser Generator
1.Fiber laser generator, using imported chips, with higher photoelectric conversion efficiency, lower power consumption
2.Deep research and development of core components: pump source, with 19 years of industry experience
3.High stability, low light decay, long service life
4.Its predecessor is the core supplier of most domestic laser manufacturers
OSPRI Laser Head
1.Cutting more sensitive: the highest support 4000W power laser, sensitive sensor. Optimized optical design with digital height sensor.
2.Cutting more durable: three pieces of protection mirror closely dust-free, more durable.
3.More efficient cutting: Dual water cooling design allows the cutting head to work continuously and steadily at high power for a long time.
Laser head structure
1. The Z axis refers to the direction in which the laser head moves up and down
2. Structure introduction: It can adapt to different specifications of pipes by adjusting the up and down movement of the laser head.
3.Structural advantages: the mechanism is simple, stable and easy to operate.
Servo motor
1.Adopt well-known domestic famous brand servo motor, the starting performance and acceleration and deceleration performance are better, the transmission process is more stable, and the control is smoother
2. Compared with motors of the same power of other brands, when maintaining high stability, it has better torque performance, lower noise, better motor protection, and adapts to harsher environments;
3.It has higher adaptability to the system, faster response speed, higher precision, better synchronization and easier debugging.
Technical Parameters
| Model | CTK-A6 | CTK-A9 | CTK-A12 | CTK-A15 |
Tube cutting working area | Round tube: φ15mm-φ220mm, L:6200mm (Circumscribed circle of square tube, rectangular tube or special-shaped tube＜φ220mm) | Manual feeding: round tube: φ8mm-φ120mm, tube length: 6500mm Square tube and rectangular tube: circumscribed circle≤φ120mm | Round tube: φ8mm-φ120mm, square tube: 10mm-80mm Rectangular tube/profile/special-shaped tube: circumscribed circle≤φ120mm (Channel steel, angle steel need to be equipped with special jaws) | Round tube: φ15mm-φ160mm (in line with national standard GB/T17395-1998) Rectangular tube: circumscribed circle≤φ160mm (in line with national standard GB/T6728-1986) Special-shaped tube: circumscribed circle≤φ160mm (please consult our technical staff for details) |
X, Y axis positioning accuracy | ±0.05mm | ±0.05mm | ±0.05mm | ±0.05mm |
X, Y axis repeat positioning accuracy | ±0.03mm | ±0.05mm | ±0.05mm | ±0.03mm |
X, Y axis max. speed | 100m/min | 120m/min | 90m/min | 100m/min |
X, Y axis max. acceleration | 1G | 1.5G | 1G | 1G |
Voltage/power | 380V/50HZ or Customized | 380V/50HZ or Customized | 380V/50HZ or Customized | 380V/50HZ or Customized |
Dimension (L x W x H) | 9600x3500x2400mm | 9600x2200x2400mm | 8900x1650x2400mm(not including splice assembly) | 8950x2200x2555mm |
Machine Weight | 5500KG | 5000KG | 3500KG | 4800KG |